If you don’t ike the way the ASDM handles certificate enrollment with a CA, and always seem to mess somehting up, I know I did. This config builder will help. The config builder simply generates the CSR then allows for the Cert to be pushed onto the system.
This config builder has been use on ASA’s with 8.x, but should work on 7.x and 8.x.
Enjoy,
Greetings All,
Attached is a Config Builder to make the ASA into a content filter. Granted, this a very brute force way to be a content filter and should be used with extreme care, but none the less it works and works great.
This was built using ASA 8.04, but should work on any version of ASA or Pix running 7.x or higher.
ASA_URL_and_Domain Filter_with example data.xls
Here is a Secure switch config withe DAI, DHCP Snooping, Port Security, ACL’s etc….
This config is based of a Cisco 2960 running c2960-lanbasek9-mz.122-50.SE3.
Secure Switch Config 0.01.xlsx
There is an issue with DAI…you need to add the following commands…
ip arp inspection vlan 25
ip arp inspection vlan 25 logging dhcp-bindings permit
ip arp inspection validate src-mac